Covered-wagons, dumpcars, gondola cars

The roof is equipped with four loading hatches and ladders, the side walls are equipped with ventilation hatches that can be used as loading hatches. Roof with corrugated sheathing. Direct ingress of moisture into the body is excluded. The binding brackets are located in the planes of the racks and do not protrude into the body beyond the plane of the skin.
Technical specifications: Load capacity, t 68 Tare weight, t, min/max 25/26 Body volume, cubic meters: full 174 Axial load, tc 23.5 Size according to GOST 9238-83 1-T Floor area, sq. m 52.8 The length of the car along the coupling axes of the automatic couplers, mm 19500 Wagon base, mm 14200 Height from the level of the rail head, mm 4830 Width, mm, max 3280 Number of loading hatches on the roof, pcs 4 Number of loading hatches on the side wall, pcs 4 Body length inside, mm 18270 Inner body width, mm 2890 Internal body height, max, mm 3450 Structural speed, km/h 120 Door opening size, mm 4050x2830 Service life, 32 years

The inner lining of the side, end walls and doors made of moisture-resistant plywood.
Technical specifications: Load capacity, t 64 Tare weight, t, max 26 Body volume, cubic meters: full 117 Maximum design axle load, kN (tc) 218.27 (22.5) Height from the level of the rail heads (y.g.r.), max, mm 4420 The length of the car along the coupling axes of the automatic couplers, mm 15100 Body size inside, mm 13860x2755x2920 The size of the doorway, mm 4000x2690 Wagon base, mm 10200 Floor area, sq. m 38.2 Service life, 30 years

The pneumatic system provides unloading to any side of the railway track and the return of the body to the transport position.
Technical specifications: Load capacity, t 63 Body volume, cubic meters 38 Tare weight, t, not more than 27.6 The maximum calculated static load from the wheelset on the rails, kN, (ts) 223,6 (22,65) Length along the axes of the coupling of auto couplings, mm 13020 Wagon base, mm 7800 Height from the level of the rail heads, max, mm 3500 Service life, 30 years

The increased height of the end sides allows you to form a "cap" of cargo and transport it without loss during transportation. The presence of "slats" between the side walls and the floor prevents spillage. The design of the car provides the necessary strength when loading bulk cargo weighing up to 2 tons, if it is carried out from a height of up to 2 m on a pre-filled cargo of a fine fraction with a height of at least 300 mm. The angle of inclination of the body during unloading is up to 45 degrees.
Technical specifications: Load capacity, t 66.4 Tare weight, t, min/max 26.5/27.6 Body volume, cubic meters: full 45 Axial load, tc 23.5 Internal dimensions of the body, mm: Length in light 10590 The width in the light on the upper bindings is 2820 Height 3530 Size GOST 9238-83 1-T Service life, 22 years

Designed for the transportation of non-aggressive bulk non-dust, bulk, stacked and piece loads that do not require protection from precipitation. Reinforced end wall and upper binding give additional rigidity to the body during loading and unloading operations.
Technical specifications: Load capacity, t 69.5 Tare weight, t, min/max 23.5/24.5 Body volume, cubic meters: full 86 Axial load, tc 23.5 Number of unloaded hatches 14 The size of GOST 9238-83 1-VM Internal dimensions of the body, mm: length in light 12768 the width in the light on the upper bindings is 2928 height 2300 Service life, 22 years